AMERIGUARD® Full Synthetic 5W-30 Motor Oil

Full Synthetic Motor Oil Passenger Car Motor Oil

AMERIGUARD® Full Synthetic 5W-30 uses the latest technology to deliver dependability, unsurpassed engine protection, performance, cleanliness, and fuel mileage. You and your vehicles work hard for the important things in life. Trust high-quality AMERIGUARD® Lubricants by Sapp Bros. to protect engines and your investment -- at an excellent value. Our motor oil is formulated to provide the following features and benefits:

  • Controls friction and wear more than 80% better than the latest API requirements.¹
  • It is engineered to improve fuel mileage and to maximize horsepower and acceleration.
  • Longer and better engine protection than conventional oils due to strong and uniform synthetic base oils and advanced molecules that provide a strong film barrier to control friction, resist wear and keep metal surfaces from coming into contact.
  • Provides a strong oil film to avoid metal-to-metal contact, even under extreme stress and heat.²
  • Stands up to heat and shearing, so it delivers long-lasting protection and control.

¹As measured against the Sequence IV Average Cam Wear Limit for API SN.
²To measure friction reduction benefits, engineers used the ball-on-disk traction test.

Applications

  • Gasoline-fueled and flex-fuel passenger cars, light trucks, and sport utility vehicles, including gasoline-electric hybrids, especially when operating under severe conditions.
  • Formulated to protect turbochargers and emission control system catalysts.
  • Formulated for use in vehicles operating on ethanol-containing fuels up to E85.

Industry/OEM Specifications

API SP Approved
ILSAC GF-6A Approved
API SJ, SH, SG, SF Meets Requirements
API SL Meets Requirements
API SM Meets Requirements
API SN Meets Requirements
API SN Plus Meets Requirements
Chrysler MS-6395 Meets Requirements
Ford WSS M2C946-B1, M2C946-A, M2C929-A Meets Requirements
GM 4718M Meets Requirements
GM 6094M Meets Requirements
ILSAC GF-4 Meets Requirements
ILSAC GF-5 Meets Requirements

Typical Properties

Boron, wt. % ASTM D5185 0.023
Calcium, wt. % ASTM D5185 0.135
Cold Cranking Simulator at (°C), cP ASTM D5293 4400 (-30)
Color ASTM D1500 3
Flash Point °C ASTM D92 227
Flash Point °F ASTM D92 441
Foam Seq. III (Tendency/Stability), mL ASTM D892 (Opt. A) 0/0
Foam Seq. II (Tendency/Stability), mL ASTM D892 (Opt. A) 10/0
Foam Seq. I (Tendency/Stability), mL ASTM D892 (Opt. A) 0/0
Gravity, °API ASTM D287 35.82
High Temperature Foaming, static foam ASTM D6082 (Opt A) 15/0
High Temperature / High Shear Vis at 150°C, cP ASTM D5481 3.2
Magnesium, wt. % ASTM D5185 0.059
Molybdenum, wt. % ASTM D5185 0.0079
Nitrogen, wt. % ASTM D4629 0.104
Noack Volatility, % loss ASTM D6375 12
Phosphorus, wt. % ASTM D5185 0.076
Pour Point °C (°F) ASTM D5950 -45°C (-49°F)
Pumping Viscosity at (°C), cP ASTM D4684 15,000 (-35)
Shear Stability, Final Viscosity in cSt ASTM D6278 9.4
Specific Gravity @ 60°F (15.6°C) ASTM D4052 0.8457
Sulfated Ash, wt. % ASTM D874 0.9
Sulfur, wt. % ASTM D4951 0.3
TBN, mgKOH/g ASTM D2896 7.9
Viscosity @ 100°C cSt ASTM D445 10.91
Viscosity @ 40°C cSt ASTM D445 62.09
Viscosity Index ASTM D2270 169
Zinc, wt. % ASTM D5185 0.085