AMERIGUARD® Full Synthetic 0W-20 Motor Oil
Full Synthetic Motor Oil Passenger Car Motor Oil
AMERIGUARD® Full Synthetic 0W-20 uses the latest technology to deliver dependability, unsurpassed engine protection, performance, cleanliness, and fuel mileage. You and your vehicles work hard for the important things in life. Trust high-quality AMERIGUARD® Lubricants by Sapp Bros. to protect engines and your investment -- at an excellent value. Our motor oil is formulated to provide the following features and benefits:
- Controls friction and wear more than 80% better than the latest API requirements.¹
- It is engineered to improve fuel mileage and to maximize horsepower and acceleration.
- Longer and better engine protection than conventional oils due to strong and uniform synthetic base oils and advanced molecules that provide a strong film barrier to control friction, resist wear and keep metal surfaces from coming into contact.
- Provides a strong oil film to avoid metal-to-metal contact, even under extreme stress and heat.²
- Stands up to heat and shearing, so it delivers long-lasting protection and control.
¹1 As measured against the Sequence IV Average Cam Wear Limit for API SN.
²To measure friction reduction benefits, engineers used the ball-on-disk traction test
Applications
- Gasoline-fueled and flex-fuel passenger cars, light trucks, and sport utility vehicles, including gasoline-electric hybrids, especially when operating under severe conditions.
- Formulated to protect turbochargers and emission control system catalysts.
- Formulated for use in vehicles operating on ethanol-containing fuels up to E85.
Industry/OEM Specifications
API SP | Approved |
ILSAC GF-6A | Approved |
API SJ, SH, SG, SF | Meets Requirements |
API SL | Meets Requirements |
API SM | Meets Requirements |
API SN | Meets Requirements |
API SN Plus | Meets Requirements |
Chrysler MS-6395 | Meets Requirements |
Ford WSS M2C947-A, WSS-M2C947-B1 | Meets Requirements |
Ford WSS M2C962-A1 | Meets Requirements |
GM 4718M | Meets Requirements |
GM 6094M | Meets Requirements |
ILSAC GF-4 | Meets Requirements |
ILSAC GF-5 | Meets Requirements |
Typical Properties
Boron, wt. % | ASTM D5185 | 0.023 |
Calcium, wt. % | ASTM D5185 | 0.135 |
Cold Cranking Simulator at (°C), cP | ASTM D5293 | 5800 (-35) |
Color | ASTM D1500 | 3 |
Flash Point °C | ASTM D92 | 226 |
Flash Point °F | ASTM D92 | 439 |
Foam Seq. III (Tendency/Stability), mL | ASTM D892 (Opt. A) | 0/0 |
Foam Seq. II (Tendency/Stability), mL | ASTM D892 (Opt. A) | 5/0 |
Foam Seq. I (Tendency/Stability), mL | ASTM D892 (Opt. A) | 0/0 |
Gravity, °API | ASTM D287 | 35.66 |
High Temperature Foaming, static foam | ASTM D6082 (Opt A) | 20/0 |
High Temperature / High Shear Vis at 150°C, cP | ASTM D5481 | 2.7 |
Magnesium, wt. % | ASTM D5185 | 0.059 |
Molybdenum, wt. % | ASTM D5185 | 0.0079 |
Nitrogen, wt. % | ASTM D4629 | 0.104 |
Noack Volatility, % loss | ASTM D6375 | 13 |
Phosphorus, wt. % | ASTM D5185 | 0.076 |
Pour Point °C (°F) | ASTM D5950 | -45°C (-49°F) |
Pumping Viscosity at (°C), cP | ASTM D4684 | 21,000 (-40) |
Shear Stability, Final Viscosity in cSt | ASTM D6278 | 7.5 |
Specific Gravity @ 60°F (15.6°C) | ASTM D4052 | 0.8465 |
Sulfated Ash, wt. % | ASTM D874 | 0.9 |
Sulfur, wt. % | ASTM D4951 | 0.3 |
TBN, mgKOH/g | ASTM D2896 | 7.9 |
Viscosity @ 100°C cSt | ASTM D445 | 8.475 |
Viscosity @ 40°C cSt | ASTM D445 | 44.59 |
Viscosity Index | ASTM D2270 | 170 |
Zinc, wt. % | ASTM D5185 | 0.085 |